100 lb. ft. MagneClutch (100MC*90F2*)
SEE TABS BELOW FOR SPECS & RESOURCES
3D MODEL AVAILABLE UPON REQUEST
Available Cooling Types.
- Model 100MC90F20 and F22 convection cooled.
- Model 100MCA90F20 forced air cooled.
Variable Speed.
- Standard 90VDC coil. Available in other voltages to order.
- Conveyor drives, traction drives, hoists, centrifuges, material handling.
- 0 to full speed.
- Quiet, unlimited life.
Compact.
- Eliminates alignment problems.
- Eliminates space wasting coupling.
- Unobtrusive machine addition.
- Blends operationally with equipment.
Maximum Effectiveness.
- Fits NEMA Motors.
- Mounts directly on NEMA 254TC, 256TC frame motors.
- Mounts directly to motor.
- Simple installation.
3D MODEL AVAILABLE UPON REQUEST
Available Cooling Types.
- Model 100MC90F20 and F22 convection cooled.
- Model 100MCA90F20 forced air cooled.
Variable Speed.
- Standard 90VDC coil. Available in other voltages to order.
- Conveyor drives, traction drives, hoists, centrifuges, material handling.
- 0 to full speed.
- Quiet, unlimited life.
Compact.
- Eliminates alignment problems.
- Eliminates space wasting coupling.
- Unobtrusive machine addition.
- Blends operationally with equipment.
Maximum Effectiveness.
- Fits NEMA Motors.
- Mounts directly on NEMA 254TC, 256TC frame motors.
- Mounts directly to motor.
- Simple installation.
100MC90F20(22) / 100MCA90F20
Data sheet
- Model
- 100MC90F20 and F22 / 100MCA90F20
- Rated Torque (lb.-ft.)
- 100
- Mounting
- Flange (8)
- Type Of Cooling
- Convection (CV) / Forced Air (FA)
- Heat Dissipation at 1800 RPM (Watts) (5)
- 1100 (CA) / 1700 (FA)
- Max Oper. Speed (RPM) (6)
- 3600
- Non-Excited Drag Torque (lb.-ft.)
- 1.0
- Inertia (WK (2)) Rotating Member (lb.-ft. (2)) x 10(-2) - OUTER
- 68.0
- Inertia (WK (2)) Rotating Member (lb.-ft. (2)) x 10(-2) - INNER
- 46.0
- Wgt. Approx (lbs.)
- 98 (CA) / 110 (FA)
- Coil Data (Input 90VDC) - CURRENT AMPERES (4)
- 1.0
- Coil Data (Input 90VDC) - RESISTANCE OHMS @ 20 C
- 68
- Note (4)
- Coils for other voltages wound to order
- Note (5)
- The data given represents the average, continuous dissipation capacity of units operating under slip conditions
- Note (6)
- Applications requiring continuous operation below 30 RPM should be referred to factory for evaluation
- Note (7)
- Utilize NEMA 254TC or 256TC frame motors
SEE TABS BELOW FOR SPECS & RESOURCES
3D MODEL AVAILABLE UPON REQUEST
Available Cooling Types.
- Model 100MC90F20 and F22 convection cooled.
- Model 100MCA90F20 forced air cooled.
Variable Speed.
- Standard 90VDC coil. Available in other voltages to order.
- Conveyor drives, traction drives, hoists, centrifuges, material handling.
- 0 to full speed.
- Quiet, unlimited life.
Compact.
- Eliminates alignment problems.
- Eliminates space wasting coupling.
- Unobtrusive machine addition.
- Blends operationally with equipment.
Maximum Effectiveness.
- Fits NEMA Motors.
- Mounts directly on NEMA 254TC, 256TC frame motors.
- Mounts directly to motor.
- Simple installation.