10 lb. ft. MagneClutch (10MC*90F20)
SEE TABS BELOW FOR SPECS & RESOURCES
3D MODEL AVAILABLE UPON REQUEST
Available Cooling Types.
- Model 10MC90F20 convection cooled.
Variable Speed.
- Conveyor drives, traction drives, hoists, centrifuges, material handling.
- 0 to full speed.
- Quiet, unlimited life.
Compact.
- Eliminates alignment problems.
- Eliminates space wasting coupling.
- Unobtrusive machine addition.
- Blends operationally with equipment.
Maximum Effectiveness.
- Standard 90VDC coil. Available in other voltages to order.
- Fits NEMA 143TC, 145TC Motors.
- Mounts directly to motor.
- Simple installation.
3D MODEL AVAILABLE UPON REQUEST
Available Cooling Types.
- Model 10MC90F20 convection cooled.
Variable Speed.
- Conveyor drives, traction drives, hoists, centrifuges, material handling.
- 0 to full speed.
- Quiet, unlimited life.
Compact.
- Eliminates alignment problems.
- Eliminates space wasting coupling.
- Unobtrusive machine addition.
- Blends operationally with equipment.
Maximum Effectiveness.
- Standard 90VDC coil. Available in other voltages to order.
- Fits NEMA 143TC, 145TC Motors.
- Mounts directly to motor.
- Simple installation.
Model 10MC90F20
Data sheet
- Model
- 10MC90F20
- Rated Torque (lb.-ft.)
- 10
- Mounting
- Flange (8)
- Type Of Cooling
- Convection (CV) / Forced Air (FA)
- Heat Dissipation at 1800 RPM (Watts) (5)
- 500 (CA)
- Max Oper. Speed (RPM) (6)
- 3600
- Non-Excited Drag Torque (lb.-ft.)
- 0.15
- Inertia (WK (2)) Rotating Member (lb.-ft. (2)) x 10(-2) - OUTER
- 4
- Inertia (WK (2)) Rotating Member (lb.-ft. (2)) x 10(-2) - INNER
- 2.3
- Wgt. Approx (lbs.)
- 28 (CA)
- Coil Data (Input 90VDC) - CURRENT AMPERES (4)
- 0.25
- Coil Data (Input 90VDC) - RESISTANCE OHMS @ 20 C
- 273
- Note (1)
- Forced Air Cooled utilizes NEMA 56C Motor
- Note (4)
- Coils for other voltages wound to order
- Note (5)
- The data given represents the average, continuous dissipation capacity of units operating under slip conditions
- Note (6)
- Applications requiring continuous operation below 30 RPM should be referred to factory for evaluation
- Note (8)
- Utilize NEMA 140TC frame motors
SEE TABS BELOW FOR SPECS & RESOURCES
3D MODEL AVAILABLE UPON REQUEST
Available Cooling Types.
- Model 10MC90F20 convection cooled.
Variable Speed.
- Conveyor drives, traction drives, hoists, centrifuges, material handling.
- 0 to full speed.
- Quiet, unlimited life.
Compact.
- Eliminates alignment problems.
- Eliminates space wasting coupling.
- Unobtrusive machine addition.
- Blends operationally with equipment.
Maximum Effectiveness.
- Standard 90VDC coil. Available in other voltages to order.
- Fits NEMA 143TC, 145TC Motors.
- Mounts directly to motor.
- Simple installation.