50 lb. ft. MagneBrake (50MB*90B20)
SEE TABS BELOW FOR SPECS & RESOURCES
3D MODEL AVAILABLE UPON REQUEST
Available Cooling Types.
- Model 50MB90B20 convection cooled.
- Model 50MBA90B20 forced air cooled.
- Model 50MBW90B20 water cooled.
Ideal Size.
- 90 Volt. Available in other voltages to order.
- Heavier brake allow extra options
- Simple base mounting.
- More compact, economical installations.
Large Power Handling Capacity.
- Largest slipway capacity available for ratings.
- Ideal for unwinds and stands.
- Automatic tension control for heavier materials. Extra large roll braking capacity.
- Controlled and emergency stops for long conveyors.
- Economic industrial cycling control.
Optimum Performance.
- Low cycle inertia.
- Faster stops and response.
- Excellent torque testing.
- Extra heat dissipation.
- Extra holding capacity, faster stops.
- Improved brake reliability.
- Allows use of smaller more efficient motor.
3D MODEL AVAILABLE UPON REQUEST
Available Cooling Ty pes.
- Model 50MB90B20 convection cooled.
- Model 50MBA90B20 forced air cooled.
- Model 50MBW90B20 water cooled.
Ideal Size.
- 90 Volt. Available in other voltages to order.
- Heavier brake allow extra options
- Simple base mounting.
- More compact, economical installations.
Large Power Handling Capacity.
- Largest slipway capacity available for ratings.
- Ideal for unwinds and stands.
- Automatic tension control for heavier materials. Extra large roll braking capacity.
- Controlled and emergency stops for long conveyors.
- Economic industrial cycling control.
Optimum Performance.
- Low cycle inertia.
- Faster stops and response.
- Excellent torque testing.
- Extra heat dissipation.
- Extra holding capacity, faster stops.
- Improved brake reliability.
- Allows use of smaller more efficient motor.
Model 50MB(W)90B20 / 50MBA90B20
Data sheet
- Model
- 50MB90B20 / 50MBA90B20 / 50MBW90B20
- Rated Torque (lb.-ft.)
- 50
- Mounting
- Base
- Type Of Cooling
- Convection
- Heat Dissipation at 1800 RPM (Watts) (5)
- 1050 (CA) / 1350 (FA) / 3000 (W)
- Max Oper. Speed (RPM) (6)
- 3600
- Non-Excited Drag Torque (lb.-ft.)
- 0.40
- Inertia (WK (2)) Rotating Member (lb.-ft. (2)) x 10(-2) - OUTER
- 24.0
- Inertia (WK (2)) Rotating Member (lb.-ft. (2)) x 10(-2) - INNER
- -
- Wgt. Approx (lbs.)
- 57 (CA) / 67 (FA) / 57 (W)
- Coil Data (Input 90VDC) - CURRENT AMPERES (4)
- 0.53
- Coil Data (Input 90VDC) - RESISTANCE OHMS @ 20 C
- 127
- Note (2)
- Coils for other voltage wound to order
- Note (3)
- Data given represents the average, continuous dissipation capacity of units operating under slip conditions
- Note (4)
- Applications requiring operation below 30 RPM should be referred to factory for evaluation
SEE TABS BELOW FOR SPECS & RESOURCES
3D MODEL AVAILABLE UPON REQUEST
Available Cooling Types.
- Model 50MB90B20 convection cooled.
- Model 50MBA90B20 forced air cooled.
- Model 50MBW90B20 water cooled.
Ideal Size.
- 90 Volt. Available in other voltages to order.
- Heavier brake allow extra options
- Simple base mounting.
- More compact, economical installations.
Large Power Handling Capacity.
- Largest slipway capacity available for ratings.
- Ideal for unwinds and stands.
- Automatic tension control for heavier materials. Extra large roll braking capacity.
- Controlled and emergency stops for long conveyors.
- Economic industrial cycling control.
Optimum Performance.
- Low cycle inertia.
- Faster stops and response.
- Excellent torque testing.
- Extra heat dissipation.
- Extra holding capacity, faster stops.
- Improved brake reliability.
- Allows use of smaller more efficient motor.